Standard product information
Family : HMI
Series : GP4000E Series
Size : 10" Wide
Model : PFXGP4502WADW
Global Code : PFXGP4502WADW
Display specifications
Display type : TFT Color LCD / Resistive Film (analog)
Display size : 10.1" Wide
Resolution : 800 x 480 pixels (WVGA)
Effective display area : W219.6 x H131.76 mm [W8.645 x H5.187 in.]
Display colors : 65,536 colors
Backlight : LED
Backlight service life : 20,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control : 8 Levels (Adjusted with touch panel)
Touch panel type : Resistive Film (analog)
Touch panel lifetime : 1,000,000 times or more, Sweeping 100,000 times or more
Language fonts : ASCII: (code page 850) alphanumeric (including European characters)
Chinese (simplified): GB2312-80 codes
Japanese: ANK 158, Kanji: 6,962 (JIS standards 1 & 2) (including 607 nonkanji characters)
Korean: (KSC5601 - 1992 codes) Hangul fonts
Chinese (traditional): BIG 5 codes
Character sizes : Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts
Font sizes : Width can be expanded 1, 2, 4, and 8 times. Height can be expanded 1/2, 1, 2, 4, and 8 times.
8 x 8 dots : 40 char. x 30 rows
8 x 16 dots : 40 char. x 15 rows
16 x 16 dots : 20 char. x 15 rows
32 x 32 dots : 10 char. x 7 rows
To save the life of the backlight, set the panel in standby mode which automatically turns the backlight off when no touch input is detected within a set time.
The display font differs depending on which (language) character, or which size you select. Also, if GP-Pro EX software is used, additional high-quality fonts are available with 16 x 16 or larger characters.
Electrical specifications
Rated input voltage : 24 Vdc
Allowable voltage drop : 1 ms or less with lowest input voltage, 10 ms or less with rated input voltage
Power consumption : 10 W or less
In-rush current : 50 A or less
Voltage endurance : 600 Vac, 20 mA for 1 minute
Insulation resistance : 500 Vdc, 10 MΩ or more (between power terminal and FG terminals)
Environmental specifications
International safety standards :
Surrounding air temperature : 0 to 50 °C [32 to 122 °F]
Storage temperature : -20 to +60 °C [-4 to 140 °F]
Ambient humidity : 85 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity : 10% to 90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust : 0.1 mg/m3 (10-7 oz/ft3 ) or less (non-conductive levels)
Pollution degree : For use in Pollution Degree 2 environment
Corrosive gases : Free of corrosive gases
Air pressure (altitude range) : 800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance : IEC/EN60068-2-6, 5 to 150 Hz, 3.5 mm (0.38 in) max., 1gn pm 3 axes
Concussion resistance : IEC 60068-2-27, 1/2 sinusoidal pulse for 11 ms, 15g on 3 axes
Electrostatic discharge immunity : EN/IEC 61131-2, 4 kV direct contact, 8 kV air contact
Electromagnetic compatibility (EMC) : IEC 61000 - 4 - 5, 0.5 kV (Differential Mode on power supply), 1 kV (Common Mode on power supply)
Memory
Application memory : FLASH EPROM 32 MB
Backup memory : FLASH EPROM 128 KB
Clock accuracy : Variations in operating conditions and battery life can cause a clock inaccuracy from -380 to +90 seconds per month.
Interface specifications
Serial (COM1) : Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)
Serial (COM2) : Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 187,500 bps, Connector: D-Sub 9 pin (plug)
USB (Type A) : Conforms to USB 2.0 (Type A) x 1
Communication distance: 3 m [9.84 ft.] or less
USB (mini-B) : Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 3 m [9.84 ft] or less
Ethernet : IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1
Structural specifications
Cooling method : Natural air circulation
Structure : Front Panel: IP65 (IEC60529), Enclosure type 4 indoor use only (UL 50) with screw installation fasteners, Rear Panel: IP20 (IEC 60529)
External dimensions : W275 x H206 x D38.2 mm [W10.83 x H8.11 x D1.5 in.]
Dimensions
External dimensions
Panel cut-out dimensions
A
B
C (Panel thickness)
R
255 ± 1 mm
[10.04 ± 0.04 in.]
185 +1 mm
[7.28 + 0.04 in.]
1 to 5 mm
[0.04 to 0.19 in.]
3 mm
[0.12 in.] max.
External dimensions with cable